The error code 5200 in various Maxify models deserves a little more attention. You can also solve it and get rid of it. The support code 5200 canon g6020 wants you to make sure that the print head is thoroughly cleaned or not. It wants you to check the ink levels and if they are unto to the mark or not. If you have this error and you’re unable to solve it, go to canon’s official website and look for troubleshooting methods.
When Canon error code 5200 occurs, you cannot print further. Hence, it is necessary to identify the reason behind the error and troubleshoot it. If you are facing the Canon Printer code 5200, and are looking for effective ways to resolve the issue, follow the various methods listed below and get started with your printer again:
1st Method: Resetting the Canon Printer
Here, you need to perform a printer reset by following the steps mentioned below:
Switch off your printer to start resolving the code 5200 Canon Printer.
Press and hold the stop button on the printer.
Press and hold the Power on button.
While you hold on the Power button, release the stop/reset button on the printer.
Press the stop/reset button twice while holding the Power button.
Wait until the printer displays an “idle message”.
Once you see the “idle” message, open the top cover of the printer to expose the ink cartridges.
Lift the cartridge cover holder and remove the Black and Color cartridges from the printer.
Place the cartridge holder back to its original position.
Replace the top cover of the printer to its initial position and switch on the printer.
Once the printer initializes, replace the cartridges to their position.
Check whether the 5200 error on Canon Printer has been resolved or not.
Greeting,
Rachel Gomez