While there are other possibilities, the Canon B200 printer error number generally indicates a problem with the print side. The print head is responsible for distributing ink from the printer cartridges to the correct paper. Following a few basic troubleshooting procedures listed below on this page, the B200 printer body issue may typically be resolved. Canon B200 Error: Common Causes are
Setup of an invalid device
Using unidentified cartridges
Ink cartridges that have been fitted incorrectly.
Printheads that have become clogged
The error code B200 is associated with a new printer's print head failure. Printheads don't do a good job of transferring ink to paper. As a result, if one or more printheads fail, the printer will cease to print. The gadget also displays the Canon pixma g3400 error code B200
Follow these steps to resolve the Canon Printer Error B20 from your device:
1. Turn off your Canon printer and wait for the Carriage to move towards the side. In case the Carriage becomes held up, open its Lid and manually push the Carriage towards either side. Press the Power button to turn your printer back on. 2. Take out each Ink Cartridge from its slot and examine its Nozzles. Carefully wipe off any congested or dried ink using a clean, lint-free cloth damped with warm water. Reload the Ink Cartridges back into their respective slots after cleaning. 3. The most crucial part here is to identify which Ink Cartridge is faulty and is thus causing the error. Keep this objective in mind before you proceed. 4. Load a New or Old Ink Cartridge, which is still working, together with a current Ink Cartridge (black or tri-color). Find out if the B200 Canon Printer Error is still around. Try swapping every Ink Cartridge until you determine which one is defective. Replace the Faulty Ink Cartridge with a New Ink Cartridge. 5. Conduct a test print to see if there are any positive changes.
This may help you,
Rachel Gomez